Thelco Pump of the Day: Worthington D1011 3×1.5×6

Worthington Pumps with Stainless Steel Fitted Construction

Today’s Thelco Pump of the Day features one of our Worthington Pumps, the D1011 3×1.5×6, supplied in a stainless steel fitted configuration with a full 6.50-inch diameter impeller installed.

This D1011 combines the proven Worthington D1000 Series design with stainless steel fitted construction. Additionally, Thelco supports these pumps with complete assemblies and thousands of Worthington Pump Parts for continued maintenance and long term operation.

Worthington D1011 3×1.5×6

First, today’s D1011 features a 3-inch suction, 1.5-inch discharge, and 6-inch nominal impeller size.

The 3×1.5×6 configuration provides another example of the range available within the Worthington D1011 family. Furthermore, the established pump design provides straightforward access to individual components when maintenance becomes necessary.

As a result, customers can continue operating proven Worthington equipment while maintaining access to replacement parts and complete pumps from Thelco.

Stainless Steel Fitted Construction

Next, this Worthington D1011 features stainless steel fitted construction.

The stainless steel fitted configuration provides stainless steel internal components where the application requires this material combination. At the same time, customers retain the established construction and serviceability of the D1011 pump design.

Therefore, the D1011 can accommodate different material requirements while maintaining the proven Worthington pump platform.

Full 6.50-Inch Diameter Impeller Installed

Additionally, this D1011 has a full 6.50 inch diameter impeller installed.

Impeller diameter plays an important role when matching a centrifugal pump to the required operating conditions. While Thelco can provide trimmed and balanced impellers for specific requirements, this particular pump retains the full 6.50 inch impeller diameter.

Consequently, this D1011 maintains the full impeller diameter available for this configuration and is ready for service.

Worthington Pump Parts Available from Thelco

In addition to manufacturing complete pumps, Thelco stocks thousands of Worthington Pump Parts for D1011 pumps and many other Worthington models.

Customers can source:

• Impellers, including full diameter or trimmed and balanced configurations
• Shafts
• Shaft sleeves
• Mechanical seals
• Bearings
• Wear components
• Gaskets
• Packing
• Additional replacement pump parts

As a result, customers can source both complete pump assemblies and individual components needed to keep existing equipment operating.

Supporting Worthington Pumps for the Long Term

Over time, access to the correct replacement components becomes increasingly important for maintaining existing pumping equipment.

For this reason, Thelco maintains an extensive inventory of components for Worthington pump models that continue operating throughout facilities worldwide. Moreover, readily available parts help customers minimize downtime and extend the service life of their existing equipment.

Thelco continues to manufacture and support Worthington pump designs across numerous sizes, materials, and configurations.