Thelco Pump of the Day: Worthington D1011 4x3x13

Thelco Pump of the Day: Worthington D1011 4x3x13

Today’s Thelco Pump of the Day features a Worthington D1011 4x3x13 centrifugal pump, manufactured with all iron fitted construction and a 12.60-inch impeller diameter.

The Worthington D1011 is part of the proven D1000 Series of centrifugal pumps. Thelco continues to manufacture new Worthington Pumps and stock thousands of Worthington Pump Parts to support both new installations and existing equipment already in service.

Worthington D1011 4x3x13

Additionally, this Worthington D1011 4x3x13 with the following configuration:

• Model: Worthington D1011
• Size: 4x3x13
• Construction: All iron fitted
• Impeller diameter: 12.60 inches
• Design: Frame-mounted centrifugal pump
• Condition: New

The 4x3x13 designation identifies this D1011 configuration with a 4 inch suction, 3 inch discharge and 13 inch nominal impeller size.

For this particular pump, the impeller has been machined to a finished diameter of 12.60 inches to meet the required operating conditions.

All-Iron Fitted Worthington Pump

This Worthington D1011 features all-iron fitted construction, providing a traditional material configuration for applications where cast iron wetted components are appropriate for the pumped fluid and operating conditions.

Material selection is an important part of specifying any centrifugal pump. Therefore, Thelco can manufacture Worthington Pumps in different material configurations depending on the pump model and application requirements.

In addition to all iron fitted pumps, Thelco supports numerous Worthington configurations and replacement components for customers maintaining existing equipment.

12.60 Inch Impeller Diameter

Nevertheless, one important specification on today’s D1011 is its 12.60 inch finished impeller diameter.

Impeller diameter directly affects the operating characteristics of a centrifugal pump. Rather than simply supplying a full diameter impeller, the impeller can be machined to the required diameter for the specified pump operating point.

For this Worthington D1011 4x3x13, the finished impeller diameter is 12.60 inches.

This is also why accurate pump information matters when ordering replacement Worthington Pump Parts. Model, pump size, material and impeller diameter can all be important when identifying the correct components.

Worthington D1000 Series Pumps

The D1011 belongs to the Worthington D1000 Series, a product line Thelco continues to manufacture and support.

These frame mounted centrifugal pumps have been used across a wide range of pumping applications. Because many Worthington Pumps remain in service for decades, continued availability of both complete pumps and replacement components is especially important.

Thelco supports multiple D1000 Series models and sizes, including D1011 and D1012 configurations.

Whether a customer needs a complete replacement pump or individual components for an existing unit, our goal is to keep these Worthington pump installations operating.

Worthington Pump Parts for the D1011

Therefore, Thelco stocks thousands of Worthington Pump Parts, including components for D1000 Series pumps.

Depending on the specific model and size, our inventory includes impellers, shafts, sleeves, casings, stuffing box components, bearing-frame components, gaskets, bearings and additional replacement parts.

That combination of manufacturing capability and inventory allows us to support customers who need anything from a single replacement component to a complete Worthington Pump.

Manufacturing Worthington Pumps at Thelco

In summary, Thelco doesn’t simply supply replacement parts. We manufacture new Worthington Pumps.

Our Worthington pump program includes D500, D800 and D1000 Series centrifugal pumps, LR and LLR horizontal split-case pumps, CNG pumps and Worthington gear pumps.

Additionally, we maintain an extensive inventory of Worthington Pump Parts to support equipment already operating in the field.

Today’s Worthington D1011 4x3x13 all iron fitted pump with a 12.60 inch impeller is another example of the Worthington equipment we continue to manufacture and support.

Worthington Pumps. Worthington Pump Parts. In stock. Ready to ship. Thelco.